Inno Setup Messages (6.0.0) (u)
(]ע������Cancel installationSelect action&Ignore the error and continue&Try again&About Setup...%1 version %2

%3



%1 home page:

%4About SetupYou must be logged in as an administrator when installing this program.The following applications are using files that need to be updated by Setup. It is recommended that you allow Setup to automatically close these applications.The following applications are using files that need to be updated by Setup. It is recommended that you allow Setup to automatically close these applications. After the installation has completed, Setup will attempt to restart the applications.Folder names cannot include any of the following characters:



%1The folder name cannot include any of the following characters:



%1Select a folder in the list below, then click OK.Browse For Folder< &Back&Browse...Cancel&Finish&Install&Make New Folder&Next >&NoN&o to AllOK&Stop downloadB&rowse...&YesYes to &AllSetup cannot continue. Please click Cancel to exit.Setup cannot install to a network drive.Setup cannot install to a UNC path.Setup Needs the Next DiskClick Finish to exit Setup.Click Next to continue, or Cancel to exit Setup.&Automatically close the applicationsCompact installation%1 KB%1 MBCurrent selection requires at least [gb] GB of disk space.Current selection requires at least [mb] MB of disk space.The system indicates that the following shared file is no longer in use by any programs. Would you like for Uninstall to remove this shared file?



If any programs are still using this file and it is removed, those programs may not function properly. If you are unsure, choose No. Leaving the file on your system will not cause any harm.Remove Shared File?ConfirmAre you sure you want to completely remove %1 and all of its components?Custom installationThe folder:



%1



does not exist. Would you like the folder to be created?Folder Does Not ExistThe folder:



%1



already exists. Would you like to install to that folder anyway?Folder ExistsThe folder name or path is too long.At least [gb] GB of free disk space is required.At least [mb] MB of free disk space is required.Setup requires at least %1 KB of free space to install, but the selected drive only has %2 KB available.



Do you want to continue anyway?Not Enough Disk Space&Do not close the applicationsDownloading additional files...An error occurred while trying to change the attributes of the existing file:Setup was unable to automatically close all applications. It is recommended that you close all applications using files that need to be updated by Setup before continuing.An error occurred while trying to copy a file:Setup was unable to create the directory "%1"An error occurred while trying to create a file in the destination directory:Download abortedDownload failed: %1 %2Getting size failed: %1 %2Unable to execute file:

%1File hash failed: %1Invalid file hash: expected %1, found %2Invalid file size: expected %1, found %2%1 failed; code %2%1 failed%1 failed; code %2.

%3Error creating INI entry in file "%1".Internal error: %1An error occurred while trying to open the README file.Invalid progress: %1 of %2An error occurred while trying to read the existing file:An error occurred while trying to read the source file:Error creating registry key:

%1\%2Unable to register the DLL/OCX: %1Unable to register the type library: %1Error opening registry key:

%1\%2RegSvr32 failed with exit code %1Error writing to registry key:

%1\%2An error occurred while trying to rename a file in the destination directory:An error occurred while trying to replace the existing file:Setup was unable to restart the computer. Please do this manually.RestartReplace failed:ErrorUnable to create a file in the directory "%1" because it contains too many filesSelect actionThe existing file is newer than the one Setup is trying to install.&Overwrite the existing file&Keep the existing file (recommended)&Do this for the next conflictsThe existing file could not be replaced because it is marked read-only.&Remove the read-only attribute and try again&Keep the existing fileSetup is not complete. If you exit now, the program will not be installed.



You may run Setup again at another time to complete the installation.



Exit Setup?Exit Setup&Skip this file (not recommended)&Ignore the error and continue (not recommended)Select actionThe file already exists.&Overwrite the existing file&Keep the existing file&Do this for the next conflictsThe file "%1" could not be located in "%2". Please insert the correct disk or select another folder.Completing [name] SetupSetup has installed [name] on your computer.

Usage: Open a command window and type "composer"Setup has installed [name] on your computer.

Usage: Open a command window and type "composer"To complete the installation of [name], Setup must restart your computer. Would you like to restart now?To complete the installation of [name], Setup must restart your computer.



Would you like to restart now?Full installationThe folder name or path is too long.The password you entered is not correct. Please try again.When you are ready to continue with Setup, click Next.Please read the following important information before continuing.When you are ready to continue with Setup, click Next.Please read the following important information before continuing.InformationPlease wait while Setup installs [name] on your computer.The folder name is not valid.The drive or UNC share you selected does not exist or is not accessible. Please select another.The folder name is not valid.An invalid parameter was passed on the command line:



%1You must enter a full path with drive letter; for example:



C:\APP



or a UNC path in the form:



\\server\share%1.



Error %2: %3Unable to create a temporary file. Setup abortedUnable to execute file in the temporary directory. Setup abortedI &accept the agreementPlease read the following important information before continuing.Please read the following License Agreement. You must accept the terms of this agreement before continuing with the installation.I &do not accept the agreementYou must enter a folder name.New Folder&Don't create a Start Menu folder&No, I will restart the computer laterThis program will not run on %1.Setup has detected that the following components are already installed on your computer:



%1



Deselecting these components will not uninstall them.



Would you like to continue anyway?Components ExistThis installation can only be uninstalled by a user with administrative privileges.This program can only be installed on versions of Windows designed for the following processor architectures:



%1This program must be run on %1.&Password:This installation is password protected.Please provide the password, then click Next to continue. Passwords are case-sensitive.&Path:You must be logged in as an administrator or as a member of the Power Users group when installing this program.Setup must restart your computer. After restarting your computer, run Setup again to complete the installation of [name].



Would you like to restart now?Setup is preparing to install [name] on your computer.The installation/removal of a previous program was not completed. You will need to restart your computer to complete that installation.



After restarting your computer, run Setup again to complete the installation of [name].Select Setup Install ModeSelect install mode%1 can be installed for all users (requires administrative privileges), or for you only.%1 can be installed for you only, or for all users (requires administrative privileges).Install for &all usersInstall for &all users (recommended)Install for &me onlyInstall for &me only (recommended)Setup is now ready to download [name] and install it on your computer.Please review these settings. Click Install to continue with the installation.Click Install to continue with the installation.Selected components:Destination location:Start Menu folder:Additional tasks:Setup type:User information:Run %1View %1Which components should be installed?Select the components you want to install; clear the components you do not want to install. Click Next when you are ready to continue.To continue, click Next. If you would like to select a different folder, click Browse.Where should [name] be installed?Please specify the location of the next disk.Setup will install [name] into the following folder.Please insert Disk %1 and click OK.



If the files on this disk can be found in a folder other than the one displayed below, enter the correct path or click Browse.Select the language to use during the installation.Select Setup LanguageTo continue, click Next. If you would like to select a different folder, click Browse.Where should Setup place the program's shortcuts?Setup will create the program's shortcuts in the following Start Menu folder.Which additional tasks should be performed?Select the additional tasks you would like Setup to perform while installing [name], then click Next.Setup was not completed.



Please correct the problem and run Setup again.Setup is already running.Setup has detected that %1 is currently running.



Please close all instances of it now, then click OK to continue, or Cancel to exit.SetupThe setup files are corrupted. Please obtain a new copy of the program.The setup files are corrupted, or are incompatible with this version of Setup. Please correct the problem or obtain a new copy of the program.The file %1 is missing from the installation directory. Please correct the problem or obtain a new copy of the program.This will install %1. Do you wish to continue?%1 SetupFile name:Location:Yes, I would like to view the README fileInstalling %1.Uninstalling %1.The source file "%1" does not existThe source file is corruptedClosing applications...Creating directories...Creating shortcuts...Creating INI entries...Creating registry entries...Extracting files...Registering files...Restarting applications...Rolling back changes...Saving uninstall information...Finishing installation...Uninstalling %1...Are you sure you want to stop the download?%1 UninstallUninstall"%1" file is corrupted. Cannot uninstall%1 (%2)%1 (%2, %3)32-bit64-bitAll usersCurrent user%1 was successfully removed from your computer.To complete the uninstallation of %1, your computer must be restarted.



Would you like to restart now?%1 uninstall complete.



Some elements could not be removed. These can be removed manually.Uninstall has detected that %1 is currently running.



Please close all instances of it now, then click OK to continue, or Cancel to exit.File "%1" does not exist. Cannot uninstall.This installation can only be uninstalled on 64-bit Windows.File "%1" could not be opened. Cannot uninstallPlease wait while %1 is removed from your computer.An unknown entry (%1) was encountered in the uninstall logThe uninstall log file "%1" is in a format not recognized by this version of the uninstaller. Cannot uninstallPlease enter your information.&User Name:You must enter a name.&Organization:&Serial Number:[name] SetupThis will download and set up [name] so you can use it easily from the command line.

This program requires %1 Service Pack %2 or later.This program does not support the version of Windows your computer is running.This program cannot be installed on %1 version %2 or later.This program requires %1 version %2 or later.InformationInformationInstallingLicense AgreementPasswordPreparing to InstallReady to InstallSelect Destination LocationSelect ComponentsSelect Start Menu FolderSelect Additional TasksUninstall StatusUser Information&Yes, restart the computer now!mlo!001Tahoma